Figure 9-8 Menu 24.3.2 - System Maintenance - Unix Syslog; Table 9-3 System Maintenance Menu Syslog Parameters - ZyXEL Communications ZyWALL 10 User Manual

Figure 9-8 Menu 24.3.2 - System Maintenance - UNIX Syslog

You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.

Table 9-3 System Maintenance Menu Syslog Parameters

Parameter
UNIX Syslog:
Active
Syslog IP Address
Log Facility
Types:
CDR
Packet triggered
Filter log
PPP log
Firewall log
Your ZyWALL sends five types of syslog messages. Some examples (not all ZyWALL specific) of these
syslog messages with their message formats are shown next:
System Information & Diagnosis
Menu 24.3.2 -- System Maintenance - UNIX Syslog and Accounting
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter log= No
PPP log= No
Firewall log= No
Press ENTER to Confirm or ESC to Cancel:
Press the [SPACE BAR] to turn on or off syslog.
Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Press the [SPACE BAR] to toggle between the 7 different Local options. The log
facility allows you to log the message to different files in the server. Please refer to
your UNIX manual for more detail.
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
No filters are logged when this field is set to No. Filters with the individual filter Log
Filter field set to Yes (Menu 21.x.x).) are logged when this field is set to Yes.
PPP events are logged when this field is set to Yes.
When set to Yes, the ZyWALL sends the firewall log to a syslog server.
ZyWALL 10 Internet Security Gateway
Description
9-7