Ftp File Transfer - ZyXEL Communications ZyWALL 10 User Manual

10.6 FTP File Transfer

In addition to uploading the firmware and configuration via the console port and TFTP client, you can also
upload the ZyWALL firmware and configuration files using FTP. To use this feature, your workstation
must have an FTP client.
When you telnet into the ZyWALL, you will see the following screens for uploading firmware and the
configuration file using FTP.
To upload the router firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the router.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading router firmware using TFTP (note
that you must remain on this menu to upload router firmware using TFTP),
please see your router manual.
You see the following screen when you telnet into Menu 24.7.2.
Transferring Files
Menu 24.7.1 - System Maintenance - Upload Router Firmware
Press ENTER to Exit:
Figure 10-6 Telnet into Menu 24.7.1
ZyWALL 10 Internet Security Gateway
10-7