Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 255
and tighten.
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Replacing the bulb for the licence plate light
Fig. 256 Remove the number plate light/replace the bulb
Read and observe
and
›
Open the tailgate.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
234
Do-it-yourself
on page 231 first.
» Fig.
256.
1
and remove it.
2
.
1
Rear Light
2
Fig. 257 Remove light / pull out connector
Read and observe
Removing
›
Open the tailgate.
.
›
3
Insert into opening
ers
» page
212, Vehicle tool kit.
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
›
Grasp the light and remove carefully in the direction of arrow
stud
.
C
›
Press together the interlocks on the connector in the direction of arrow
›
Carefully remove the connector from the lamp assembly in the direction of
the arrow
.
4
Fitting
›
Slide the plug in the opposite direction of the arrow
light.
The locks on the plug must be inserted securely.
and
on page 231 first.
» Fig. 257
the clamps for removing the full wheel cov-
A
with the screwdriver from the tool kit.
B
.
1
from the
2
.
3
» Fig. 257
into the
4