Change bulb for turn signal switch (halogen headlight)
Fig. 254 Changing the bulb for the turn signal light
Read and observe
and
›
Remove the protective cap
» Fig. 252
A
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
254.
1
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Push a new bulb into the bulb holder up to the stop.
›
Slide in the socket with the bulb with the fixing lug
into the recess on the reflector.
›
Fit the protective cap
» Fig. 252
A
on page 231 first.
on page 232.
upwards so that it fits
B
on page 232.
Replacing the bulb for the fog light
.
2
Fig. 255 Remove the number plate light / replace the bulb
Read and observe
Remove the protective grille and headlight
›
Insert your fingers into opening
›
Release the protection grill by pulling in the direction of arrow
›
Unscrew the screws
Vehicle tool kit.
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Pull the lamp holder until it stops in the arrow direction
›
Remove the lamp holder in the direction of the arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
5
›
Attach the connector.
and
on page 231 first.
.
A
with the screwdriver from the tool kit
B
.
2
.
4
Fuses and light bulbs
.
1
» page
212,
.
3
.
5
.
6
233