Side Stand; Stand Rod Removal; Remove Stand Together With The Plate - APRILIA RS4 125 Service Station Manual

RS4 125
•
Insert the screw with related washer
and the special nut to secure the chain
tensioner plate paying attention to cor-
rect positioning of the spring.
•
Fit the roller on the chain tensioner plater after having assembled it complete with bearings
and spacer.
Stand

Side stand

•
Rest the vehicle on the optional rear
stand.

Stand rod removal

•
With closed stand, release the spring
(1)
•
Unscrew and remove the nut (2).

Remove stand together with the plate

•
Unscrew and remove the two stand
switch fixing nuts (3).
•
Unscrew and remove the internal nut
and the pin (4) by collecting the wash-
er.
•
Slide off the nut and remove the cable
grommet.
•
Slide off the stand together with the
plate.
Chassis
CHAS - 243