Electrical System Installation; Scope And Applicability - APRILIA RS4 125 Service Station Manual

RS4 125
4. Battery
5. Main fuses
6. Fan relay
7. Light relay
8. Front headlight assembly
9. Start-up relay
10.Electric fan
11.Lambda probe
12.Fuel reserve sensor
13.Oil pressure sensor
14.Fuel pump
15.Coil/ECU
16.Injection relay
17.Secondary fuses
18.Instrument panel
19.Turn indicators
20.Regulator
21.Spark plug boot
22.Control unit
23.Temperature sensor
24.Starter motor
25.Neutral sensor
26.Stand sensor

Electrical system installation

Scope and applicability

The purpose of this document is to define the position of the vehicle cable harness, its routing and how
it is fixed on the chassis, tool kit compartment support and the saddle mounting, any potential problems
and particular checks to be carried out on the connections and routings in order to reach the objectives
of vehicle reliability.
Materials used and corresponding quantities
The electrical system consists of the following cable harnesses and parts:
•
No.1 Main Cable Harness
•
No.1 Headlight Cable Harness
•
No.1 License Plate Cable Harness
•
No. 1 Frame - Engine Ground Cable
•
No. 2 Turn indicators cable harness
Electrical system
ELE SYS - 65