Balancing Countershaft Fitting - APRILIA RS4 125 Service Station Manual

RS4 125
Removing the
clutch cover
Removing the flywheel cover
•
Remove the countershaft gear.
•
Remove the countershaft from the al-
ternator side.

Balancing countershaft fitting

•
Insert the countershaft from the alter-
nator side.
•
Insert the gear aligning its reference to
the primary gear.
•
Using the specific tool, tighten the nut
remember first to place the washer.
Specific tooling
864486 Blocking the countershaft
Engine
ENG - 159