Power Over Ethernet Powered Device - Planet FGSD-910P User Manual

2.6 Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
Since the FGSD-910P per PoE port supports 48V DC PoE power
output, please check and assure the Powered Device's (PD) accept-
able DC power range is from 48V DC. Otherwise, it will damage the
Note
Powered Device (PD).
16
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and
other Ethernet/non-Ethernet end-devices to the
central where UPS is installed for un-interrupt
power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus,
Factory and Warehouse can install the Access
Point anywhere with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, and
Bank can install IP Camera without limits of
installation location. It needs no electricians to
install AC sockets.
PoE Splitter
PoE Splitter splits the PoE 48V DC over the
Ethernet cable into 5/12V DC power output. It
frees the device deployment from restrictions
due to power outlet locations, which eliminate
the costs for additional AC wiring and reduces
the installation time.