Table of Contents
Advertisement
2. Hardware Description
This product provides three different running speeds – 10Mbps and 100Mbps at
port 1 to port 8, 10/100/1000Mbps at port 9 and automatically distinguishes the
speed of incoming connection.
This section describes the hardware features of the FGSD-910P. For easier
management and control of the Switch, familiarize yourself with its display
indicators, and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the FGSD-910P, please read
this chapter carefully.
2.1 Front Panel
The Front Panel of the FGSD-910P PoE Ethernet Switch consists of 8x Auto-Sensing
10/100Mbps Ethernet RJ-45 Ports and 1x Auto-Sensing 10/100/1000Mbps Ethernet
RJ-45 Port. The LED Indicators are also located on the front panel of the FGSD-
910P.
8-Port 10/100Mbps+1 Gigabit
FGSD-910P
2.1.1 LED Indicators
System
LED
Color
PWR
Green
Per 10/100Mbps Port
LED
Color
LNK/ACT
Green
PoE
Orange
802.3af
PoE Switch
10/100
LNK
ACT
Speed
1
2
3
4
5
6
7
8
8
9
PWR
PoE
LNK/
ACT
Figure 2-1: FGSD-910P Switch Front Panel
Light: Indicate the Switch has power.
Light: Indicate the link through that port is successfully
established at 10/100Mbps Full duplex mode.
Blink Slowly: Indicate the link through that port is
successfully established at 10/100Mbps
Half duplex mode.
Blink Fast: Indicate that the Switch is actively sending
or receiving data over that port.
Light: Indicate the port is providing 48V DC in-line
power.
1
2
3
4
5
Function
Function
6
7
8
9
Gigabit
9
Advertisement
Table of Contents
