Ip Office Department / Workgroup Poe Switch - Planet FGSD-910P User Manual

Cable distance for Switch
The cable distance between the FGSD-910P and other network
equipment should not exceed 100 meters for UTP/STP cable.
Make sure the wiring is correct
It can use Category 3/4/5 cable in 10Mbps operation. To reliably
operate your network at 100Mbps or 1000Mbps, you must use an
Note
Unshielded Twisted-Pair (UTP) Category 5/5e/6 cable, or better
Data Grade cabling. While a Category 3 or 4 cables may initially
seem to work, it will soon cause data loss.
2.5.2 IP Office Department / Workgroup PoE Switch
With the business office expansion, the additional telephones required could be
installed in less cost via the implementation of PoE IP Telephony system than that
of the traditional circuit wiring telephony system. The FGSD-910P PoE Ethernet
Switch helps enterprises to create an integrated data, voice, and powered network.
The IEEE 802.3af compliant IP Phones can be installed without the need of
an additional power cable because the power can be provided via the standard
Ethernet cable from the connected FGSD-910P.
The Wireless AP group, PoE IP Phones and Analog Telephony Adapter work perfectly
with the FGSD-910P which injects power through the Ethernet cables. With the
FGSD-910P, IP Telephony deployment becomes more reliable and cost effective,
which helps enterprises save tremendous cost when upgrading from the traditional
telephony system to IP Telephony communications infrastructure.
100Base-TX UTP
100Base-TX UTP with PoE
PoE
1000Base-T UTP
Power Line (DC)
DC
Telephone wire
Figure 2-7: IP Office Department / Workgroup PoE Switch Connection
PoE IP
PC Group
Camera
PoE
N
Laptop PoE Wireless AP
PoE VoIP
PoE
Phone
PoE
Phone
PoE VoIP ATA
DC
PoE IP Camera 802.3at splitter
FGSD-910P
N
PoE
Core
Switch
FGSD-910P
PoE
15