Department/Workgroup Poe+ Switch - Planet FSP-804P User Manual

Cable distance for Switch
The cable distance between the FSD-804P and PC should not
exceed 100 meter for UTP/STP cable.
Make sure the wiring is correct
Category 3/4/5 cable can be used in 10Mbps operation. To
reliably operate your network at 100Mbps, you must use
Note
an Unshielded Twisted-Pair (UTP) Category 5/5e/6 cable, or
better Data Grade cabling.
may initially seem to work, it will soon cause data loss.

3.4.2 Department/Workgroup PoE+ Switch

With 4 PoE+ in-line power interfaces, the FSD-804P can easily build a power that
can be centrally controlled by IP phone system, IP camera system and wireless AP
group for the enterprise. For instance, up to 4 cameras can be installed around the
corner in the company for surveillance demands or up to 4 wireless APs can be
utilized to build a wireless roaming environment in the office. Without the power-
socket limitation, the Switch makes the installation of cameras or wireless AP more
easily and efficiently
Data+Power
FSD-804P
802.3at PoE
IP Camera
Data+Power
N
802.3at PoE Wireless AP
Figure 3-5: Department/Workgroup PoE/PoE+ Switch Connection
Data
PoE
PoE
Data+Power
N
While Category 3 or 4 cables
LAN / PCs
10/100BASE-T Data
Power
AC
PoE
802.3af PoE
VoIP ATA
802.3af PoE VoIP Phone
PoE
AC
N
PoE
100BASE-TX UTP
100BASE-TX UTP with PoE
Power Line (AC)
2.4GHz 802.11n
17