Mitel 5320 User Manual page 21

16 Using the phone system
To call a number from your incoming calls list (only available if dialing from the
incoming call list is supported by your Service Provider):
1
Press the CALLS softkey on your phone (or the Incoming Calls List
programmed key). The caller's name of the most recent call that you
received is displayed.
2
Use the keys to navigate the list.
3
Press the DIAL softkey to make a call to the displayed number.
The next available Line Appearance is selected and the system will
attempt to dial the displayed number by prefixing it with the appropriate
digits for external dialing (usually "9" or "91" depending on configuration).
If the number can be dialed as such, you will hear ringing once the call
has been placed. If the number cannot be dialed as such, the call will fail
and you will have to dial the number manually remembering to include the
proper prefix digits.
Notes: The position of the call in the call list is displayed in front of the
phone number.
The * symbol beside the position of the call means that the call was not
answered.
If the call was answered by a member of your call pickup group, then the
call will show as unanswered (with a *) on your phone and answered
(without a *) on the call pickup group member's phone that answered the
call.
*CALLS means that there has been at least one unanswered call since
the last time you viewed the list of calls you received.
Redial on the 5320/5330/5340/5260 phone
Using Redial you can view a list of calls that were made and also redial a
number in that list without using the keypad. The maximum amount of
numbers in your redial list is typically ten but is dependant on your service
provider.
To use Redial, follow these steps:
1
Press the REDIAL softkey or the
The number that you most recently dialed is displayed.
2
Use the keys to navigate the list (if required).
3
Press the TIME softkey if you wish to display the time and date of the call.
4
Press the NUMBER softkey if you wish to display the number dialed.
key.
Final