Using A Headset; Connect And Configure The Headset; Answer A Call With The Headset; End A Call With The Headset - Mitel 5320 User Manual

Using a
headset
106 Using the phone system
The Mitel 5212, 5224, 5312, 5324, 5330, and 5340 IP phones support the use
of specially designed headsets made by Plantronics. The following headset
types are available:
• Monaural over-the ear
• Binaural over-the head with voice tube
• Binaural over the head with noise canceling microphone
Some headsets are all supplied with a control switch that can be used to mute
the microphone.

Connect and configure the headset

To connect the headset to the Mitel 5320/5330/5340/5260, 5224/5324 or
5212/5312 IP phone, follow these steps:
1 Plug the headset into the headset jack on the back of the set.
2
Remove the handset from the cradle. You can hook it over the top of the
set cradle.
3
If using a Mitel 5320/5330/5340/5260 or 5224/5324 IP phone, press the
DIR softkey, then the QUIT softkey to take the phone to an on-hook (or
idle) state.
If using a Mitel 5212/5312 IP phone, press the
key to take the phone to an onhook (or idle) state.

Answer a Call with the headset

To answer a call while using the headset, press the Line Appearance key or
the ANSWER softkey.

End a Call with the headset

To end a call while using the headset on the Mitel 5224/5324 or 5320/5330/
5340/5260 IP phone, press the END softkey
To end a call while using the headset on the Mitel 5212/5312 IP phone, press
the key.

Mute the headset

To mute the microphone, press and hold the control switch if it has one.
key, then press the
Final