Using Features Via The 5304 Phone - Mitel 5320 User Manual

86 Using the phone system
To end the call before you have completed dialing, replace the handset.
Making a second call on the 5304 phone
To make a second call while on an active call, follow these steps:
1
Press any available Line Appearance key. This puts the active call on
hold, and provides dial tone for a second call.
2 To make an internal call, dial the extension. To make an external call, dial
the prefix required for external dialing (usually 9) followed by the number
you want to call
320
3 When you finish dialing the number the call is placed.
Calling: Robin Jones
4 If you place an internal call, the LCD displays the extension and name of
the connected party once the call is answered. If you place an external
call, the LCD screen displays the name of the connected party, or if the
name is unknown, just the phone number.
320: Robin Jones
5 To switch between two active calls, press the flashing Line Appearance
key. This puts the active call on hold, and activates the other call.
Ending one call keeps the second call on hold. To reconnect to the second
call, press the flashing Line Appearance key.

Using features via the 5304 phone

This section explains the features available from your phone. Some of these
features must be pre-programmed in order to be available. To learn how to
program features to keys, see
3-way call on the 5304 phone
Using 3-Way Call, you can set up a phone call among three separate parties.
You must have a Transfer/Conference memory key programmed to use this
feature. See "Program memory keys"
"Program memory keys"
on page 124.
on page 124.
Final