Manual Tuning - Jensen VM9224 Operating Instructions Manual

VM9224
16. 1/2: Touch to view a second screen of menu choices
17. : Touch to view the SOURCE MENU and select a new playback source
18. MEM: View screen used to enter current channel into preset memory
19. : Touch to view the SETUP menu
20. PS (Preview Scan): Touch to scan all stations available, stopping for 5
seconds at each and continuing until a station is selected
21. PTY Indicator
22. RDS Indicator
23. AS: Touch to automatically store stations
24. PTY: Touch to activate the PTY function
25. LOC: Press to activate/deactivate the Local function
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the RADIO circle) to view the
SOURCE MENU. Touch "Radio".
• Press the SRC button (4) on the front panel to switch to the AM/FM
or RADIO source.
Selecting FM/AM Band
Touch the BAND button (15) on the screen to change between the
following bands: FM1, FM2,
FM3, AM1, and AM2.
NOTE: The BAND button on the unit only works when the TFT is closed.
Seek Tuning
To seek the next higher station:
• Touch the >>| button on screen.
To seek the next lower station:
• Touch the |<< button on screen.

Manual Tuning

To increase or decrease the tuning frequency one step:
• Touch the >> or << buttons on screen.
Downloaded from Caradio-Manual.com Manuals
18