Dvd/Vcd Video Operation - Jensen VM9224 Operating Instructions Manual

VM9224

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen displays
"PARKING" with a blue background. Rear video screens, if applicable,
will operate normally.
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see "Rating Sub-menu Features" on page 21).
You cannot insert a disc if there is already a disc in the unit or if the power is
off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.
Ejecting a Disc
Press the button (3) on the unit to eject the disc. The unit automatically
reverts to Tuner mode. You may eject a disc with the unit powered off.
The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button (3) on the unit to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button
(4) on the front panel.
Downloaded from Caradio-Manual.com Manuals
21