Seek Tuning; Manual Tuning - Jensen VM9214BT Operating Instructions Manual

VM9214BT
16. 1/2: Touch to view a second screen of menu choices
17. Touch to view the SOURCE MENU and select a new playback source
18. MEM: View screen used to enter current channel into preset memory
19. : Touch to view the SETUP menu
20. PS (Preview Scan): Touch to scan all stations available, stopping for 5
seconds at each and continuing until a station is selected
21. PTY Indicator
22. RDS Indicator
23. AS: Touch to automatically store stations
24. PTY: Touch to activate the PTY function
25. LOC: Touch to activate/deactivate the Local function
Switching to Radio Tuner Source
• Touch the top left corner of the screen to view the SOURCE MENU. Touch
"Radio".
• Press the SRC button (10) on the front panel or remote control (8) to
switch to the AM/FM or RADIO source.
Selecting FM/AM Band
Touch the BAND button (15) on the screen to change between the following
bands: FM1, FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the unit only works when the TFT is closed.

Seek Tuning

To seek the next higher station, touch the
To seek the next lower station, touch the |

Manual Tuning

To increase or decrease the tuning frequency one step, touch the
buttons on screen.
| button on screen.
button on screen.
21
or