Manual Tuning - Jensen VM9225BT Operating Instructions Manual

VM9225BT
15. AS: Touch to automatically store stations.
16. PTY: Touch to activate the program type related search function.
17. SCAN: Touch to scan all stations available, stopping for 5 seconds at each and
continuing until a station is selected.
18. SAVE: Touch to display view screen used to enter current channel into preset
memory.
19. BAND: Touch to change between AM/FM bands.
20. DIRECT ENTRY: Touch to access the direct entry screen.
21. Presets provides a display of the preset frequencies. Touch to recall preset
stations.
22. OPTIONS: Touch to display CT and LOC functions.
More Tab
Touching the More tab will reveal the Options tab. Touching the Options tab will
display the following CT and LOC functions on the Tuner TFT display screen.
LOC: This allows the user to
Local function is on, only radio stations with a strong local radio signal are played.
CT: (Clock Time, RDS feature) When enabled the radio system clock is
synchronized with broadcasters time signal setting the clock automatically. In
some regions where daylight savings time is not adhered to, the system clock will
be off by 1 hour. In these cases, set CT to OFF and manually set the clock.
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the RADIO box) to view the SOURCE
MENU. Touch "Radio".
• Press the SRC button on the front panel to switch to the AM/FM or RADIO
source.
Selecting FM/AM Band
Touch the BAND button on the screen to change between the following bands:
FM1, FM2, FM3, AM1, and AM2.
Seek Tuning
To seek the next higher station, touch the
To seek the next lower station, touch the

Manual Tuning

To increase or decrease the tuning frequency one step, touch the
activate local station reception function. When the
button.
button.
or button.
27