Parking Brake Inhibit - Jensen VM9224 Operating Instructions Manual

Image/Display Settings
Video Output Modes
Table 2 shows the video output mode for each playing source.
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the floowing steps:
1. Long-press the NAV button on the front panel repeatedly to move from
the "BRIGHT" setting to "CONTRAST".
2. Turn the rotary encoder to adjust the setting level.
Long-press the NAV button on the front panel 1-3 times to exit the
3.
picture adjustment menu.

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
Downloaded from Caradio-Manual.com Manuals
Table 2: Video Output Modes
Playing Source
AM/FM TUNER
DVD
AUX IN
Video Output Modes
RGB Mode
RGB Mode
CVBS Mode
6
VM9224