Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9226BT Mobile Multimedia Receiver for maximum enjoyment.
Congratulations on your purchase of the Jensen VM9226BT Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9226BT installed by a reputable installation shop. • Fast Forward/Reverse - 2X, 4X, 8X and 20X • Slow Motion Forward/Reverse - 1/2, 1/4, 1/6 and 1/8...
Page 4
Rear Camera The VM9226BT is “camera ready. ” Before accessing any camera features, you must purchase and install a rear video camera. Once the camera is connected and operating properly, the CAMERA source mode will become active. While the camera is not installed, the CAMERA option appears gray, indicating the function is not available.
Page 5
VM9226BT WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle.
VM9226BT CONTROLS AND INDICATORS VM9226BT EJECT SD CARD AV INPUT OPEN 1. Disc Slot 9. USB Interface Connector Connect a USB device for playback 2. EJECT Button of music/video files. Press to eject a disc. 10. SD Interface Connector 3. SRC Button...
VM9226BT 1. REMOTE CONTROL See Table 1 for remote control functions. iPod MUSIC PHOTO VIDEO...
Page 8
VM9226BT Table 1: Remote Control Functions Button Function Name TUNER CD/MP3/ iPod MENU Enters Turns on/off Selects the main PBC when Photo menu of playing mode. the disc. VCD. TITLE Enters the Plays the Selects title menu first ten Music of the disc.
Page 9
VM9226BT Table 1: Remote Control Functions Button Function Name TUNER CD/MP3/ iPod PHOTO/ Language Selects SUBTITLE selection Photo for subtitle. mode. DISP/ Displays Displays Displays Display Displays CLEAR playing playing playing playing playing information. information. information. information. information. Delete entry...
Page 10
VM9226BT Table 1: Remote Control Functions Button Function Name TUNER CD/MP3/ iPod VOL + Increases Increases Increases Increases Increases volume. volume. volume. volume. volume. Selects Selects the Searches for Selects Pauses previous an available playback/ previous chapter for radio previous...
Page 11
VM9226BT Table 1: Remote Control Functions Button Function Name TUNER CD/MP3/ iPod Displays Displays set-up set-up parameters. parameters. OPEN/ Opens/ Opens/ Opens/ Opens/ Opens/ CLOSE closes closes closes closes Closes the TFT the TFT the TFT the TFT the TFT monitor.
VM9226BT OPERATING INSTRUCTIONS Power On / Off Press the /SRC button to turn the unit on. The buttons on the front of the unit light up and the current mode status appears on the LCD. Press and hold the button to power off the unit.
VM9226BT External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod®, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). MUTE SD CARD AV INPUT Right Audio...
VM9226BT Audio Control Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Page 16
VM9226BT Table 2: Equalizer Adjustments Setting Adjustable Function Range 60 Hz Selects the low pass filter frequency. Touch the + or - buttons to adjust the 80 Hz settings. 100 Hz 200 Hz 0.5 kHz Selects the mid pass filter frequency.
Page 17
VM9226BT Balance-Fader Touch the BAL-FAD button on the left side of the equalizer screen to display the balance/fader screen. Setting Adjustable Function Range Balance -16 to +16 Balances the audio output levels between the left and right side of the vehicle.
VM9226BT System Reset To correct a system halt or other illegal operation, [RESET] Button use the tip of a pen to press the reset button located on the front bottom-left corner of the unit behind the protective cover. After a system reset, the unit restores all factory default settings.
VM9226BT SETTINGS MENU To access system settings, touch the button on the screen to enter the SETTINGS MENU. The GENERAL Sub-menu appears highlighted in blue. Accessing Menu Items Touch the sub-menu name to select a sub-menu (Language, Audio, RDS, etc.). The features available for adjustment under the highlighted sub-menu option will appear in the left of the screen.
Page 20
VM9226BT General Sub-menu Features Setting Options Function Tuner • AM Frequency Spacing - 10 kHz • AM Frequency Band - 530 kHz ~ 1720 kHz Region • FM Frequency Spacing - 200 kHz • FM Frequency Band - 87.5 MHz ~ 107.9 MHz S.Amer1...
Page 21
VM9226BT Setting Options Function Clock (HH:MM) Clock appears in the top right corner of the screen during certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12. Beep No beep sounds. When turned on, an audible beep tone confirms each function selection.
Page 22
VM9226BT Rating Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password.
Page 23
VM9226BT Audio Sub-menu Features Setting Options Function Employ the Dynamic Range Control for better playback for low volumes. Loudness Select low frequency boost only or high and low frequency boost. HI/LO Subwoofer Turns the subwoofer output on or off. Sub Filter...
VM9226BT Setting Options Function Camera In Normal Reverse the camera image as if looking through a rear-view mirror. Mirror NSTC Video Input (Input The color signals are output in the circuitry auto detects the standard NTSC format. video signal from the The color signals are output in the Aux In source).
VM9226BT TUNER OPERATION Tuner TFT Display Menu Page 1 Menu Page 2 RADIO: Touch to view the SOURCE MENU and select a new playback source. 2. Current radio band indicator. 3. Stereo broadcasting indicator. 4. Strong local signal broadcasting indicator.
VM9226BT 15. AS: Touch to automatically store stations. 16. PTY: Touch to activate the program type related search function. 17. SCAN: Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected.
VM9226BT Direct Tuning DIRECT ENTRY To enter a radio station directly, touch to display the direct entry menu. Enter the desired radio station frequency using the on-screen number pad. If you . Press OK to tune to the selected wish to delete an entry number touch station and touch the OK button.
Page 29
VM9226BT Recalling a Station Select a band (if needed). 2. Touch an on-screen preset button to select the corresponding stored station. Auto Store (AS) To select six strong stations and store them in the current band: Select a band (if needed).
VM9226BT DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays:...
Page 31
VM9226BT Touch to advance to the next chapter on the DVD. Touch to see the second page of DVD controls. Touch to select a chapter/track directly using the on-screen display direct entry menu display. Touch to stop DVD playback. 5. Sub: Touch during playback to select the subtitle language if the disc is recorded in multiple languages.
Page 32
VM9226BT Inserting a Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “Rating Sub-menu Features”).
VM9226BT Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. • Touch A-B on the second page of DVD on-screen controls to set the start point (A) of the repeated section.
VM9226BT Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, touch AUDIO on the second page of DVD on-screen controls to choose a language. Each time the icon is touched the language will change.
VM9226BT General Disc Information Table 4: Disc Properties Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) (MPEG 2 Method) Single side double layer (DVD-9) 133 minutes Double side single layer (DVD-10) 242 minutes Double side double layer (DVD-18)
Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. Media Requirements The VM9226BT will play music or other audio files from the following disc media: • CD-DA • CD-R/RW • DVD • DVD+R/RW...
Page 37
VM9226BT DISC: Touch to view the SOURCE MENU and select a new playback source. 2. Repeat Play Indicator - This indicator is lit when the repeat mode is active. 3. Random Play Indicator - This indicator is lit when the random mode is active.
Page 38
VM9226BT Playlist Screen The Playlist screen allows you to directly search for music on your disc. • Touch a track title (if available) or track number to begin playback of that track. • Touch to view the previous playlist page. Touch to view the next playlist page.
VM9226BT Controlling Playback Inserting a Disc Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode.
VM9226BT MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.
Page 41
For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9226BT player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.
Page 42
VM9226BT MP3/WMA TFT Display The on-screen indicators and touch key areas for MP3/WMA playback are outlined below. Menu Page 1 Menu Page 2...
Page 43
VM9226BT DISC: Touch to view the SOURCE MENU and select a new playback source. 2. Repeat Play Indicator - This indicator is lit when the repeat mode is active. 3. Random Play Indicator - This indicator is lit when the random mode is active.
Page 44
VM9226BT Playlist Screen The Playlist screen allows you to directly search for music, video or photo files stored on your MP3 disc/USB device. • Touch a folder to view the contents of the directory or touch a track title/file name to begin playback of that file.
Page 45
VM9226BT Controlling Playback Inserting a Disc Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode.
VM9226BT iPod®/iPhone® OPERATION ® NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. ® Accessing iPod Mode This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen to access Playlist, Artist, Albums, Songs, etc. Supported models include, but are not limited to the following: • iPhone®...
Page 47
VM9226BT The Search Screen allows you to search for music or video files stored in your iPod®/ iPhone®. Touch the Music list box to search for music grouped by playlists, artists, albums, songs, genres, composer or podcast. Touch the Video list box to search for videos grouped by movie, music videos, TV shows, video podcasts, rentals and video playlists.
Page 48
VM9226BT Indicators/Controls The on-screen indicators and touch key areas for iPod® playback are outlined below. iPod: Touch to view the SOURCE MENU and select a new playback source. ll Indicates whether media is playing or paused. 3. Rock: Indicates the current equalizer setting.
X. To clear your entry and start over, touch the back arrow. NOTE: To transmit the video from your iPod® to the VM9226BT screen, you must set the following options through the iPod® video settings menu: TV Out = On, TV Signal = NTSC, and Widescreen = On.
VM9226BT PANDORA RADIO OPERATION Pandora Radio is available via your iPhone® (data usage will occur) or iPod® touch (Wi-Fi). NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device . For iPod® video or photo playback, you must purchase the jLink-USB cable.
Page 51
VM9226BT Thumbs Down Icon: Press this icon to tell Pandora to not play this track. Pandora will skip to the next track. If the skip limit has been reached, Pandora will continue to play but your feedback will be recorded.
Page 52
VM9226BT To Launch/Stop Pandora Radio Launch the Pandora app on your iPhone. The Pandora icon appears on the Main Menu Screen. 2. Touch the Pandora icon. The Pandora Screen appears. 3. Touch the icon to begin playback or the icon to pause playback.
Mode” option. PLEASE DO NOT use the power saving mode with the VM9226BT. • Before accepting or making a call, make sure your mobile phone’s “Bluetooth®...
Page 54
VM9226BT Bluetooth User Interface The on-screen indicators and touch key areas for Bluetooth® functions are outlined below. BT: Touch to view the SOURCE MENU and select a new playback source. 2. User: Indicates the current equalizer setting. 3. EQ: Touch for quick access to Equalizer level settings.
VM9226BT Hands Free Profile (HFP) To use a mobile phone with this unit, it is necessary to first establish a connection using Bluetooth® wireless technology. The connection is normally established using Hands Free Profile (HFP), which gives you full control of functions available on the mobile phone source.
The mobile phone should display a message similar to “Device Connected” and the mobile phone and the unit are now connected. VM9226BT will appear on the mobile phone list of devices. Managing Incoming Calls When connected to a Bluetooth®...
VM9226BT Answering an Incoming Call To answer an incoming call touch the icon. For best reception, speak loudly and clearly into the microphone. To end the conversation, touch the icon. Rejecting an Incoming Call Press the Transfer Call icon to reject an incoming call. The call will revert to your mobile phone and be left for voice mail.
VM9226BT Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer Call icon. You can only transfer a call after it has been answered. Pressing the Transfer Call icon again will return the audio from the mobile phone to the unit.
Page 59
VM9226BT While listening to audio the following functions are available: Pause/Play ( ) icon: Touch to pause playback. Touch again to resume playback. 2. Previous ( ) icon: Touch to play the previous track. 3. Next ( ) icon: Touch to play the next track.
VM9226BT SiriusXM® RADIO OPERATION SiriusXM User Interface The on-screen indicators and touch key areas for SiriusXM® functions are outlined below. Menu Page 1 Menu Page 2 SXM icon: Touch to view the SOURCE MENU and select a new playback source.
Page 61
VM9226BT 14. Options icon: Touch to go to the SXM Parental Lock Menu. 15. Mem icon: Touch to display screen used to enter current channel into preset memory. 16. Scan icon: Touch to scan to the next available channel. The tuner will pause for approximately five seconds at that channel.
Page 62
VM9226BT Switching to SiriusXM® Radio • Touch the top left corner of the screen (the radio box) to view the SOURCE MENU. Touch the “SiriusXM” icon. • Press the SRC button on the front panel to switch to the SXM source.
Page 63
VM9226BT Using Preset Stations Six numbered preset buttons store and recall channels for each band. All six stored channels for the current band appear on the screen. Storing a Channel Select a band (if needed), then select a channel. 2. Touch the on-screen Mem icon to access the Preset Screen.
Page 64
VM9226BT Searching for a Channel Search by Channel To search by channel: On the SirusXM® menu page, touch the Category/Channel icon (if needed) to select Channel. 2. Touch List to go to the Channel Screen. The following screen appears. 3. Touch a channel to tune to that channel.
Page 65
VM9226BT Parental Lock Options The SXM Parental Lock Menu allows you to block access to individual channels or mature channels. Lock Current Channel: Individual channels may be locked. The Lock Current Channel option allows you the ability to lock a certain channel. Locking does not allow the SiriusXM® tuner to access that channel’s audio or metadata.
Page 66
VM9226BT password, use this code to change a password. Unlock All Channels: The Unlock All Channels option unlocks all (individual and mature) locked channels. To unlock all channels: Tune to a channel that is not locked (for example Channel 1, preview channel).
VM9226BT REAR CAMERA OPERATION This unit is “camera ready. ” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT DETECTED”...
VM9226BT TROUBLESHOOTING Table 6: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom...
Page 69
VM9226BT Problem Cause Corrective Action TFT Monitor No image Incorrect connection to parking Check wiring and brake wire correct Parking brake is not engage Stop vehicle in safe place and apply parking brake Flashing image DVD is not compatible with...
Page 70
VM9226BT Problem Cause Corrective Action Disc does not play Disc is warped or scratched Use disc in good back condition Clean disc with soft Disc is dirty or wet cloth Laser pickup is dirty Clean laser pickup with cleaning disc...
VM9226BT Disc Error Messages Message Displayed Cause Corrective Action Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side Disc not present in Insert disc loading compartment...
VM9226BT Care and Maintenance Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit.
VM9226BT SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: >...
Page 74
VM9226BT Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATO type DIN chassis dimensions: 7” X 7” X 4” (178mm x 178mm x 100mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1%...