Exiting The System Setup Menu - Jensen VM9224 Operating Instructions Manual

VM9224
P.VOL Sub-menu Features
Setting
Source
Level
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP menu, select the
"TS CAL" option.
After entering calibration mode, a crosshair
the screen. To begin calibration, press and hold the crosshair for one second
until it moves to the next quadrant. Continue for each quadrant until the
calibration is completed.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto Run on/off by
chooing the "Demo" option from the SETUP MENU.
When Demo "Auto Run" is Off, you can select "Demo > Run" to start Demo
Mode. Demo scrolls through the various source screens, simulating activity on
the display. "Demo" is discreetly displayed in blue text (below the clock), to
indicate the unit is in Demo Mode. To stop Demo Mode, press the upper-left
quadrant of the TFT (Source select).
When Demo "Auto Run" is On, the unit will automatically display Demo Mode
when powered on.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, touch the BACK button on
the screen.
Downloaded from Caradio-Manual.com Manuals
Options
RADIO Choose a source for which you would like to increase the rel-
ative volume (LEVEL).
DISC
USB1
USB2
SD
BT
NAV
AUX
CAMERA
0-6 Increase relative volume for specified source up to 6 deci-
bels.
Function
appears in a corner quadrant of
16