Xerox WorkCentre 3615 System Administrator Manual page 102
Black and white multifunction printer
Hide thumbs
Also See for WorkCentre 3615:
- User manual (214 pages) ,
- System administrator manual (126 pages) ,
- Quick use manual (21 pages)
Table of Contents
Advertisement
Faxing
Enter a two-digit tone code, then touch OK.
b.
c.
At the Restart System prompt, touch Close.
12. To customize printer instructions when the specifications of the received documents do not match
the printer sheets:
Touch Discard Size.
a.
b.
To have the printer print oversized faxes on two sheets of paper, select Off.
c.
To have the printer reduce the size of the incoming fax to fit the selected paper, select Auto
Reduction.
d.
To have the printer discard the data or image that does not fit the margins specifications,
select On.
Touch OK.
e.
At the Restart System prompt, touch Close.
f.
g.
Touch the Back arrow to return to the previous menu, or press the Services Home button to
return to Service Home.
Configuring Fax Transmission Defaults from the Control Panel
1.
At the printer control panel, press the Machine Status button.
Touch Tools > Admin Settings.
2.
3.
Touch Fax Settings.
4.
Touch Transmission Defaults.
5.
To configure the printer to auto redial a busy number or a line that does not answer:
a.
Touch Auto Redial Setup.
To change the number of redial attempts, touch Number of Redial, enter a number from 0--- - 9,
b.
then touch OK.
Touch OK.
c.
d.
At the Restart System prompt, touch Close.
6.
To change the interval between the redial attempts:
Touch Redial Interval, then enter a number from 1--- - 15 for the delay in minutes.
a.
b.
Touch OK.
At the Restart System prompt, touch Close.
c.
7.
To change the interval between resend attempts:
a.
Touch Interval Timer, then enter a number from 3--- - 255 for the delay in seconds.
Touch OK.
b.
c.
At the Restart System prompt, touch Close.
Touch the Back arrow to return to Transmission Defaults.
d.
8.
To select the dialing type for your outgoing faxes:
a.
Touch Dial Type.
b.
Select an option:
•
PB uses push-button tone dialing.
•
DP (10 PPS) sets 10 pulse per second dialing pulses as the dial type.
DP (20 PPS) sets 20 pulse per second dialing pulses as the dial type.
•
®
102
Xerox
WorkCentre
System Administrator Guide
®
3615 Black and White Multifunction Printer
Hide quick links:
Advertisement
Table of Contents
