Assigning Ip Address Automatically/Manually; Assigning The Ip Address Of The Printer - Xerox WorkCentre 6015 User Manual

Assigning the IP Address of the Printer

This section includes:

Assigning the IP Address Automatically ................................................................................................................. 53

Assigning the IP Address Manually ........................................................................................................................... 53

Finding the IP Address of the Printer ....................................................................................................................... 55

Changing the IP Address Using CentreWare Internet Services...................................................................... 55
By default, the printer is set to acquire an IP address from the network server using DHCP. Network
addresses assigned by DHCP are temporary, however. After a specified time, the network could assign a
new IP address to the printer. If the print driver is set to an IP address that changes periodically, you can
experience connectivity issues. To avoid problems, or if your network administrator requires a static IP
address for the printer, you can assign the IP address to the printer.
Note: You can view the IP address of your printer from the the System Settings Page, the printer
control panel, or CentreWare Internet Services.
See also:
Assigning the IP Address Manually
Finding the IP Address of Your Printer
Assigning the IP Address Automatically
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. At Network, press OK.
To select TCP/IP, press the Down Arrow button, then press OK.
4.
5. To select IPv4, press the arrow buttons, then press OK.
At Get IP Address, press OK.
6.
To select DHCP/AutoIP, press the arrow buttons, then press OK.
7.
8. To return to the Ready screen, press Return.
Assigning the IP Address Manually
You can assign a static IP address to your printer from the printer control panel. Once an IP address is
assigned, you can change it using CentreWare Internet Services.
To assign a static IP address to the printer, you need the following information:

An IP address properly configured for your network

The Network Mask address

The default Router/Gateway address
on page 53
on page 55
WorkCentre 6015 Color Multifunction Printer
Installation and Setup
53
User Guide