Setting Method - Epson TM-L90 Developer's Manual

Confidential
1. Set paper which you will set "paper layout setting" and close a cover.
2. Turn on the printer.
3. Host transmit GS ( A pL pH n m ( pL=2, pH=0, n=0, m=64) and the paper is fed. Then
"paper layout setting" is done.
J Setting method 3:
Transmit "GS ( E"and set all setting item.
Note:
If "paper layout setting" is stored in NV memory in advanced, need to transmit GS ( E (Function 48)
with state of inserting stored papaer.
Follow this method when use label paper with black mark or set custom setting.
And after setting "paper layout setting" using setting method 1 or 2, you can change a part of
parameter using setting method 3 (It is impossible to change paper type only). Refer to GS ( E
(Function 49) of ESC/POS Application Programming Guide.
Advantage
Setting Setting enable only
method 1 printer
Setting Not need to input
method 2 many parameter
Setting Custom seting is
method 3 enable such as
rewinding or start
printing position
Note:
If insert different size paper which is stored in NV memory, paper layout error may occur.
4-2 Application Development Information
Demerit
Custom setting is
disable
Custom setting is
disable
Need to input many
parameter
Application
Receipt papaer, label As necessary, printing
papaer, receipt area (2 item) (Set using
papaer with black GS ( E (Function 49))
mark
Receipt papaer, label As necessary, printing
papaer, receipt area (two item) (Set
papaer with black using GS ( E (Function
mark 49))
Label papaer with Paper type, distance
black mark between marks, mark
When set custom length, paper wide,
setting printing area (8 items)
Manual setting
parameter
Rev. A