Default Setting; Setting Method - Epson STYLUS 3000 Service Manual

Product Descriptions

1.5.2 Default Setting

Default setting mode enables users to change the default settings (initialization values). The set values
are stored in the EEPROM and are not lost after the printer is turned off. To reset the values to the factory
values, perform EEPROM reset operation or use the adjustment program described in Chapter 4.

1.5.2.1 Setting Method

See Figure 1-11 for the default setting method.


Be sure to turn the printer off after the default setting operation is executed, since adjustment
values are not stored in the EEPROM until the printer is turned off.


The latest values set before power-off are stored in the EEPROM.
1-26
Figure 1-11. Default Setting Flowchart
CAUTION
Rev. A