Power Switch; Printer Setup Details; Installing Horizontally Or Vertically - Epson TM-L90 Developer's Manual

Confidential

Power Switch

The power switch is located on the top left of the printer.
Turn on the power by holding down the POWER button 1 second or longer. Turn off the power
by holding down the POWER button 3 seconds or longer.
The power switch can be disabled by DIP switch operation. (see page 2-9)
Note:
Make sure to check whether the AC adapter is connected to the power supply, before turning on the power
switch of the printer.
See Chapter 3 for details of power switch functions.

Printer Setup Details

Installing Horizontally or Vertically

You can install the printer vertically (with the paper exit at the front) or horizontally (with the
paper exit on top) either on by hanging it on a wall (using the optional hanging bracket set, WH-
10) or a flat surface. Both the vertical and horizontal positions are shown below.
When you install the printer horizontally, attach the control panel label as shown in the
illustrations below.
Note:
To hang the printer on the wall, see the Wall Hanging Bracket Set Installation Manual provided with the
WH-10 for instructions.
Rev. A
TM-L90 Developer's Guide
Product Overview 1-5