5-6
When [Over] , [Under] or [---] is Displayed
When
ver or
nder is displayed, the light source is out of measuring range.
When --- is displayed, the color temperature is outside the calculation range.
5-6-1
Display of [Over] , [Under] or [---]
When [Over] is displayed:
If the amount of light being measured is brighter than the
ma imum measuring range,
When measuring ambient light, decrease the brightness of the
illumination.
When measuring high power flash light, turn the Light
Selection Ring
, and change the range from L
2
H
(
), or lower the flash output power.
When [Under] is displayed:
If the amount of light being measured is lower than the
minimum measuring range,
When measuring ambient light, increase the brightness of the
illumination.
When measuring flash light, turn the Light Selection Ring
and change the range from H
raise the flash output power.
When the color temperature is outside the calculation
range, [---] is displayed.
NOTE
Measurement and display will ta e longer in light levels below 0l . The LC illumination
will normally switch off during measurement to avoid influence to measurement.
5. Measuring Light Sources [Measurement Screen]
ver is displayed.
nder is displayed.
(
) to L
(
77
Light Selection Ring
(
) to
Measuring utton
,
2
), or
2
5