5-3
Measurement in Cordless Flash Mode
Cordless Flash Mode is preferable when the flash to sub ect distance is too far to
use a sync cord or when wireless measuring is desired.
In this measuring mode, the meter will go into measurement standby mode for 0
seconds) to wait for a burst of flash to measure.
Operation
1.
On the Measurement screen, touch the [Measuring Mode] icon
and select the [Cordless Flash Mode] icon on the next screen.
Select the measuring mode. ( P22)
Measurement Screen
2.
Touch the [OK] button.
Confirms and returns to the Measurement screen.
To return to the Measurement screen without confirming, touch the Cancel button.
5. Measuring Light Sources [Measurement Screen]
Measuring Mode Selection Screen
utton
Cancel
65
utton