Preset Editing - Konica Minolta CL-70F Operating Manual

7-3

Preset Editing

Select [Preset Editing (2°)] button or [Preset Editing (10°)] button.
Preset value is used for the reference value in Monitor Function.
This preset reference value can be input manually or set from memorized value if
there is data in meter's memory.
Refer to page 156 for details on Field of View (2 degrees and 10 degrees).
Preset Editing Screen
(Page 1)
To page 2
[Memory] Button
* If no value is stored in
memory, the [Memory]
button is not activated.
NOTE
Up to 5 presets can be registered for each of viewing angle 2° and 10°.
Preset Editing Screen
(Page 2)
To page 3 To page 1
122
7. Meter Settings [Setting] Screen
Preset Editing Screen
(Page 3)
To page 2
[Close] Button