Accompanying Accessories - Konica Minolta CL-70F Operating Manual

Cri illuminance meter
Hide thumbs Also See for CL-70F:
Table of Contents

Advertisement

Accompanying Accessories

The following items are included with the CRI Illuminance Meter CL-70F. Confirm if any
accessories are missing after unpacking.
If something is missing, contact the sales agent.
Batteries (size AA) and a USB cable are not included.
Quick Guide
Safety Precaution
Safety Precaution
For Proper Operation
Before using this product, please read this "Safety Precautions" for
proper operation.
WARNING
CAUTION
NOTICE
General Safety Information
Read the Operating Manual before use.
Keep the Operating Manual on hand for reference at any
time.
Stop using this product when there are any abnormalities.
The modification or disassembly of this product is prohibited.
Do not attempt to repair this product by yourself.
This product is intended only for persons with expert
knowledge.
Monitor children so that they do not touch this product.
Use this product in a usage environment described in the
Operating Manual.
This product is not waterproof.
Authorized Service Facility
Neck Strap
English
WARNING
There is a danger of electrical shock when using high
voltage strobes.
Avoid contacting the terminals.
This product emits electromagnetic waves.
Do not bring this product close to persons with
pacemak-ers.
Do not use this product in an explosive atmosphere.
The WARNING symbol indicates the
Use of devices emitting electromagnetic waves is
possibility of death or serious injury if the
prohibited in hospitals.
product is not used properly.
o not use the instrument in places where flammable
The CAUTION symbol indicates the
or combustible gases (gasoline etc.) are present.
possibility of minor to moderate personal
oing so may cause a fire.
injury or product damage if the product is
The instrument should not be operated if it is
not used properly.
damaged or the AC adapter is damaged, or if smoke
The NOTICE symbol indicates cautions
or odd smells occur. oing so may result in a fire.
or restrictions when using the product.
In such situations, turn the power OFF immediately,
Please read all notes to avoid errors in
disconnect the AC adapter from the AC outlet (or
operation.
remove the batteries if they are being used) and
contact the nearest KONICA MINOLTA-authorized
service facility.
o not dispose of batteries in fire, short their
terminals, apply heat to them, or disassemble
them. Also, do not recharge them (if they are not
chargeable). Doing so may cause explosion or heat
generation, resulting in fire or in ury.
Do not touch or hold the batteries with wet hands.
Doing so may cause electric shock or failure.
Soft Case
CD-ROM
(Operating Manual, CL-70F Utility)
CAUTION
Check the material of the neck strap to see if there is any
risk of allergy.
Be careful of sudden emission of lights from strobes.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
o not use batteries other than those specified by
IC
MINOLTA. Never mix old and new batteries or batteries of
different types. When installing batteries in the instrument,
ensure that they are correctly orientated according to the (+)
and (-) marks. Failure to adhere to these instructions may
cause batteries to explode or leak electrolyte, resulting in
fire, in ury or air pollution.
Do not use the AC adapter of USB power supply type.
oing so may cause fire, in ury or electric shoc .
NOTICE
Do not leave this product on car dashboards in hot weather.
This may damage the product.
Remove the batteries when this product is not in use for a
long period of time.
When the desired performance is not achieved, stop using
this product and contact the service center.
Information for Users on Collection and
Disposal of Old Equipment
To protect environment, do not through this device
and batteries away with the normal household waste
at the end of those life, but bring them in at an
official collection point of your country for recycling.
Inspection Certificate
9229-A8FG-11
vii
Inspection
Certificate
CRI Illuminance Meter
PRODUCT
MODEL
CL-70F
SERIAL NO.
This is to certify that the above product has
been inspected with the results listed on the
reverse and has be en found to satisfy the
inspection standards of this company.
Inspector :

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents