4-1-2
Selecting the Exposure Time (Ambient Modes Only)
Set a
posure Time for ambient measurement.
Operation
1.
Touch the [Exposure Time] indication on the Measurement screen.
Touch the [Auto], [0.1 sec] or [1.0 sec] button.
2.
Touch the [OK] button.
Confirms the settings, and returns to the previous Measurement screen.
Touch Cancel to return to the previous measurement screen without setting.
Exposure time is set.
NOTE
In uto mode, the CL-70F automatically selects among
determined by the illumination available, to achieve a proper result in a convenient way.
Two fi ed reading times are available to enable e act comparison of multiple
measurements.
When measuring high illuminance levels, set the
When ta ing measurements in low Illuminance, set the
NOTICE
.1 sec and 1. sec may not cover some measurement range of illumination
and [OVER] or [UNDER] appears. In this case, set Exposure time to "Auto".
Measuring Screen
4. Setting the Measuring Conditions
Exposure Time Screen
measuring times,
posure Time to 0. sec.
posure time for .0 sec.
24
The selected
button will
be displayed
encircled in
blue.
[OK]
Button
[Cancel]
Button