Erasing The Entire Homelink Memory (All Three Programs) - Lexus GX 460 User Manual

430
5-4. Using the other interior features
Press and hold the programmed
6
®
HomeLink
inside the vehicle) for 2 seconds
and release it. Repeat this
sequence
up to 3 times to complete pro-
gramming.
If the garage door opener motor
activates when the HomeLink
ton is pressed, the garage door
opener motor
®
HomeLink
Repeat the steps above to program another device for any of the remaining
7
®
HomeLink
Reprogramming a single HomeLink
■
When the following procedure is performed, buttons which already have
devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
1
When the HomeLink
2
®
HomeLink
takes 20 seconds for the HomeLink
Erasing the entire HomeLink
Press and hold the 2 outside buttons for
10 seconds until the indicator light
flashes.
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
GX460_OM_OM60L72U_(U)
button (located
(press/hold/release)
®
but-
recognizes the
signal.
buttons.
®
button
®
indicator starts flashing, continue to hold the
button and perform "Programming HomeLink
®
indicator to start flashing).
®
memory (all three programs)
®
I n f o r ma t i o n P r o v i d e d b y :
®
button.
®
" from (it
1