Lexus GX 460 User Manual page 429

Test the HomeLink
3
pressing the newly programmed
button and observing the indica-
tor light:
If the indicator light is solid/
●
continuous, programming has
been completed and your
device should activate when
the HomeLink
pressed and released.
If the indicator light blinks rapidly for 2 seconds and then turns into a
●
solid/continuous light, proceed with the following instructions
programming a rolling code system.
Programming a rolling code system

Locate the "Learn" or "Smart"
4
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by man-
ufacturer. Please refer to the opera-
tor' s manual supplied with the garage
door opener motor for details.
Press and release the "Learn" or
5
"Smart" button.
Perform
6
after performing
GX460_OM_OM60L72U_(U)
5-4. Using the other interior features
®
operation by
®
button is
within 30 seconds
.
5
I n f o r ma t i o n P r o v i d e d b y :
429
for
4
5