544
7-2. Steps to take in an emergency
Firmly tighten each nut two or three
4
times in the order shown in the illus-
tration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
Reinstall the wheel ornament.
5
Stowing the flat/spare tire, jack and tools
Lay down the tire with the outer side
1
facing up, and install the holding
bracket.
Insert the holding bracket tab into one of
the holes in the wheel.
Raise the tire.
2
Pull the tire towards the rear of the vehicle when raising. After raising, visually
check that the tire is not interfering with suspension components.
Stow the tools and jack securely, and replace all covers.
3
GX460_OM_OM60L72U_(U)
I n f o r ma t i o n P r o v i d e d b y :