194
4-2. Driving procedures
Turn signal lever
Operating instructions
The turn signal lever can be used to show the following intentions of the driver:
Right turn
1
Lane change to the right (push and
2
hold the lever partway)
The right hand signals will flash until you
release the lever.
Lane change to the left (push and
3
hold the lever partway)
The left hand signals will flash until you
release the lever.
Left turn
4
Turn signals can be operated when
■
The engine switch is in IGNITION ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
GX460_OM_OM60L72U_(U)
I n f o r ma t i o n P r o v i d e d b y :