The meters and display illuminate when
■
The engine switch is in IGNITION ON mode.
Instrument cluster brightness adjustment
■
The instrument cluster brightness levels when the tail lights are on and off can be
adjusted.
The brightness of the instrument cluster lights
■
When the tail lights are on, the brightness will change. However, when the surroundings
are bright (daytime, etc.) turning on the tail lights will not change the instrument cluster
brightness.
In addition, the brightness of the instrument cluster lights is automatically adjusted based
on the light sensor detecting how bright the surroundings are.
When disconnecting and reconnecting battery terminals
■
The trip meter data will be reset.
If the trip meter was displayed last, the odometer will be displayed after resetting.
Customization
■
Setting of sensitivity of the ambient light sensor used for dimming the meter lights can be
changed. (Customizable features: P. 586)
NOTICE
To prevent damage to the engine and its components
■
Do not let the indicator needle of the tachometer enter the red zone, which indicates
●
the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is in the red
●
zone (H). In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (P. 555)
GX460_OM_OM60L72U_(U)
2. Instrument cluster
I n f o r ma t i o n P r o v i d e d b y :
81
2