Conditions in which the function may not operate correctly
■
In the following conditions, the camera sensor may be unable to recognize lane markers
causing the lane departure warning function to operate incorrectly. However, this does
not indicate a malfunction.
When driving through an area with no lane markers, such as a tollbooth, a crossing or
●
before a ticket checkpoint
When driving on a sharp curve
●
When lane markers are extremely narrow or extremely wide
●
When the vehicle leans to one side an unusual amount due to a heavy load or improper
●
tire inflation pressure
When the following distance between your vehicle and the vehicle ahead is extremely
●
short
When the lane markers are yellow (These may be more difficult for the system to rec-
●
ognize compared to white markers.)
When the lane markers are broken, "Botts' dots", "Raised pavement marker" or stones
●
When the lane markers are on a curb etc.
●
When lane markers are obscured or partially obscured by sand, dirt, etc.
●
When there are shadows on the road running parallel with lane markers, or if a shadow
●
covers the lane markers
When driving on a particularly bright road surface, such as concrete
●
When driving on a road surface that is bright due to reflected light
●
When driving in a location where the light level changes rapidly, such as the entrance to
●
or exit from a tunnel
When sunlight or the headlights of oncoming vehicles are shining directly into the cam-
●
era lens
When driving on roads that are branching or merging
●
When driving on a road surface that is wet due to rain, previous rainfall, standing water,
●
etc.
When the vehicle experiences strong up-and-down motion such as when driving on an
●
extremely rough road or on a seam in the pavement
When headlight brightness at nighttime is reduced due to dirt on the lenses, or when
●
the headlights are misaligned
When driving on winding roads or roads that are uneven
●
When driving on rough or unpaved roads
●
When changing the tires
■
Depending on the tires used, sufficient performance may not be maintainable.
Warning messages and buzzers for LDA system
■
Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution while driving. (P. 522, 523)
GX460_OM_OM60L72U_(U)
4-5. Using the driving support systems
I n f o r ma t i o n P r o v i d e d b y :
235
4