Erasing The Entire Homelink Memory - Lexus GX470 2004 Repair Manual

Hide thumbs Also See for GX470 2004:

Table of Contents

three programs)

To erase all previously programmed codes at one time, press

and hold down the 2 outside buttons for 20 seconds until the

indicator light flashes.

If you sell your vehicle, be sure to erase the programs stored

in the HomeLink

D When programming the HomeLink

Transceiver, you may be operating a garage door or

other device. Make sure people and objects are out

of the way of the garage door or other device to

prevent potential harm or damage.

D Do not use this HomeLink

with any garage door opener that lacks the safety

stop and reverse feature as required by federal safety

standards. (This includes any garage door opener

model manufactured before April 1, 1982.) A garage

door opener which cannot detect an object (signaling

the door to stop and reverse), does not meet current

federal safety standards. Using a garage door opener

without these features increases risk of serious

injury or death.

INTERIOR EQUIPMENT

Universal Transceiver