Planet GSD-1002M User Manual page 91

 Flow Control
Buttons
: Click to apply changes.
The page includes the following fields:
Object
 LAG
 Description
 Port Type
 Enable State
 Speed
 Duplex
 Flow Control Config
 Flow Control Status
When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used.
Current Rx column indicates whether pause frames on the port are obeyed.
Current Tx column indicates whether pause frames on the port are transmitted.
The Rx and Tx settings are determined by the result of the last Auto-Negotiation.
Check the configured column to use flow control.
This setting is related to the setting for Configured Link Speed.
Figure 4-4-8 LAG Port Status page screenshot
Description
The LAG for the settings contained in the same row.
Display the current description.
Display the current port type.
Display the current enable state.
Display the current speed.
Display the current duplex mode.
Display the current flow control configuration.
Display the current flow control status.
91
User's Manual of GSD-1002M