The page includes the following fields:
Object
Port
State
Rate (Kbps)
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port
Egress Rate Limit
(Kbps)
Figure 4-8-18 Egress Bandwidth Control Settings page screenshot
Description
Select port number for this drop down list.
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-8-19 Egress Bandwidth Control Status page screenshot
Description
The switch port number of the logical port.
Display the current egress rate limit.
185
User's Manual of GSD-1002M