Multicast Profile Setting - Planet GSD-1002M User Manual

4.7.7.1 Multicast Profile Setting

The Add Profile and Profile Status screens in
The page includes the following fields:
Object
 IP Type
 Profile Index
 Group from
 Group to
 Action
Buttons
: Click to add multicast profile entry.
Figure 4-7-36 &
Figure 4-7-36 Add Profile Setting page screenshot
Description
Select IPv4 or IPv6 for this drop down list.
Indicates the ID of this particular profile.
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering a start IP address.
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering an end IP address.
Sets the access mode of the profile; either permit or deny.
- Permit
Multicast join reports are processed when a multicast group falls
within the controlled range.
- Deny
When the access mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled
range.
Figure 4-7-37 IGMP/MLD Profile Status page screenshot
Figure 4-7-37 appear.
169
User's Manual of GSD-1002M