Planet GSD-1002M User Manual page 63

 Notify Type
 User Name
 UDP Port
 Time Out
 Retries
Buttons
: Click to add a new SNMPv3 host entry.
The page includes the following fields:
Object
 Server Address
 Notify Type
 User Name
 UDP Port
 Time Out
 Retries
 Action
last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::'
is a special syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example, '::192.1.2.34'.
Set the notify type in traps or informs.
Indicates the user string when send SNMP trap packet.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message
via this port, the port range is 1~65535.
Indicates the SNMP trap inform timeout. The allowed range is 1 to 300.
Indicates the SNMP trap inform retry times. The allowed range is 1 to 255.
Figure 4-2-34 SNMPv3 Host Status page screenshot
Description
Display the current server address.
Display the current notify type.
Display the current user name.
Display the current UDP port.
Display the current time out.
Display the current retry times.
: Delete the SNMPv3 host entry.
63
User's Manual of GSD-1002M