Planet GSD-1002M User Manual page 71

Managed desktop switch
Hide thumbs Also See for GSD-1002M:
Table of Contents

Advertisement

 Received Broadcast
Packets
 Transmit Multicast
Packets
 Transmit Broadcast
Packets
Object
 Alignment Errors
 FCS Errors
 Single Collision
Frames
 Multiple Collision
Frames
 Deferred
Transmissions
 Late Collision
 Excessive Collision
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which
were addressed to a broadcast address at this sub-layer.
The total number of packets that higher-level protocols requested betransmitted,
and which were addressed to a multicast address at this sub-layer, including
those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a broadcast address at this sub-layer, including
those that were discarded or not sent.
Figure 4-3-5 Ethernet link Counters page screenshot
Description
The number of alignment errors (missynchronized data packets).
A count of frames received on a particular interface that are an integral number of
octets in length but do not pass the FCS check. This count does not include
frames received with frame-too-long or frame-too-short error.
The number of successfully transmitted frames for which transmission isinhibited
by exactly one collision.
A count of successfully transmitted frames for which transmission is inhibited by
more than one collision.
A count of frames for which the first transmission attempt on a particularinterface
is delayed because the medium was busy.
The number of times that a collision is detected later than 512 bit-times into the
transmission of a packet.
A count of frames for which transmission on a particular interface fails due to
excessive collisions. This counter does not increment when the interface is
71
User's Manual of GSD-1002M

Advertisement

Table of Contents
loading

Table of Contents