Table of Contents
Advertisement
Transcendent Series: IP Cameras
Select "Property" and then select internet protocol according to the actual situation (for
example: IPV4). Next, click "Property" button to set the network of the PC.
② Open
an
IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
③ After downloading Active X control, the login dialog box will pop up.
④ Input the default username and password and then enter to view.
1.2 WAN
To
access the camera
via a
router or virtual
server:
① Make sure the camera is connected via LAN and then log in the camera via LAN and
go to the Config#Network Config#Port menu to set up the port number.
② Go to Config #Network Config#IP Address menu to modify the IP address.
③ Go to the router's management interface through IE browser to forward the IP
5
Advertisement
Table of Contents
