Transcendent Series: IP Cameras
first select the menu on the left, and then set the relative parameters.
3.1 System Configuration
The "System configuration" includes two submenus: Basic Information and Date &
Time.
3.1.1 Basic Information
In the basic information interface, user can set up the device name and also can check
the relative information of the server.
Setting steps:
1. Clicking the "Config" icon
bring up
the menu list.
2. Clicking the "Basic Information" will pop up a window as shown below.
3. Input the name of the device in the "Device name" text box.
4. Press the "Save" button to save the settings.
3.1.2 Date & Time Configuration
Setting steps:
1. Go to "System Configuration" # "Date & Time".
2. Set time zone.
3. Enable DST mode as required.
4. Set time. You may set time manually or enable NTP.
3.2 Video Configuration
Camera Configuration includes five submenus: Camera Configuration, Video Stream,
10