Alarm Configuration; Motion Detection Area - Vitek VTC-TNB42R3F User Manual

Ip camera series transcendent series 3 megapixel outdoor wdr ip cameras with up to 150’ ir range

Hide thumbs Also See for VTC-TNB42R3F:

Table of Contents

Transcendent Series: IP Cameras

2. Check "Enable" and then click "Draw" button.

3. Drag the mouse to set the ROI area.

4. Set the level.

5. Click "Save" button to save the settings.

You will see the selected ROI area is clearer than other areas especially in low bitrate

condition.

3.3 Alarm Configuration

Alarm configuration includes three submenus: Motion Detection Area, Motion Detection

Trigger and Motion Detection Schedule.

1. Go to "Alarm configuration" # "Motion Detection Area" to see an interface as shown

below.

2. Move the "Sensitivity" scroll bar to set up the motion trace sensitivity.

3. Check "Add", press the "Ctrl" button and move mouse to select the motion detection

area; Select "Erase" and move the mouse to clear all motion detection area.

4. Press the "Save" button to save the settings.

Table of Contents

Vtc-tnb36r3v Vtc-tnt30r3f Vtc-tnt30r3v Vtd-tnd30r3v