Table of Contents
Advertisement
Transcendent Series: IP Cameras
5. 1. Select "Enable RTSP server".
2. RTSP Port: Access Port of the streaming media. The default number is 554.
3. RTSP Address: The RTSP address you need to input in the media player.
4. You can also choose to enable anonymous viewer login.
3.4.7 UPnP
Go to "Network Configuration"# "UPnP" interface as shown below.
Select "Enable UPnP" and then input friendly name.
Then double click "Network" icon on the desktop of the PC to see an icon with the
friendly name and IP address of the camera. You may quickly access the device by
double clicking this icon.
3.4.8 Mail Setting
Go to "Network Configuration" # "Mail Setting" interface.
1. From Email: Sender's e-mail address.
2. User name and password: Sender's user name and password.
3. Server address: SMTP name of sender.
4. Select the secure connection type at the Secure Connection dropdown list according
to user' actual needs.
5. Email address list: Add email address into the list.
6. Email address: Receiver's e-mail address.
7. After all parameters are setup, you can click "Test your account settings". If email is
sent
successful, a "Test Successful" window will pop up, if not, you can try other email
addresses or check the setting.
Notice: If you change the static IP into PPPoE and select mailbox, there will be an
20
Advertisement
Table of Contents
