Table of Contents
Advertisement
Transcendent Series: IP Cameras
Configuration" and "Network Configuration" are optional .
$
Default Configuration
Click "Load default" button to restore all system settings to the default status.
3.5.4 Reboot Device
Go to Advanced configuration—Reboot device to see an interface as shown below.
Click "Reboot device" button to reboot the device.
3.5.5 Upgrade
Go to Advanced Configuration—Upgrade interface as shown below.
1. Click "Browse" button to select the saved path of the upgrade file.
2. Click "Upgrade server firmware" button to start upgrading the application program.
3. The device will restart automatically. After you successfully update the software, click
"OK" button to close browser and then re-open browser to connect IP-CAM.
Notice: Do not shut down the PC or close the IP-CAM during upgrade.
24
Advertisement
Table of Contents
