Table of Contents
Advertisement
the image quality, the more bitrate will be required.
Bitrate: Please choose it according to the actual network situation.
I Frame interval: It is recommended to use the default value. If the value is too high,
the read speed of the group of pictures will slow resulting in quality loss of video.
Video encoding profile: Baseline, main and high profile are options. Baseline profile
is mainly used in interactive application with low complexity and delay. Main/high profile
is mainly used for higher coding requirement.
Alarm picture size: Please select it according to the actual situation.
Video encode slice split: If enabled, you may get more fluency in image even
though using a low-performance PC.
3.2.3 OSD Configuration
1. Go to "Video Config" # "OSD Config" menu to display the interface as
shown below.
You may set time stamp, device name and custom OSD here. Drag the time stamp and
custom OSD to set their position. Then press the "Save" button to save the settings.
2.
3.2.4 Video Mask
You can set up to 4 masked areas.
Transcendent Series: IP Cameras
12
Advertisement
Table of Contents
