Table of Contents
Advertisement
Transcendent Series: IP Cameras
User Name
User Type
Binding
address
Password
Confirm
Password
3.5.2 Security Configuration
1. Go to Advanced Configuration#Security Configuration to see a tab shown below.
6. 2. Check "Enable IP address" check box, select "Deny the following IP
address" input IP address in the IP address list box and click "Add" button.
Then this IP address will display in the list box; the operation step of "Allow the
following IP address" is the same as that of "Deny the following IP address".
7. 3. Select the IP address you want to delete from the IP address list box and
click "Delete" button to delete that IP address.
8. 4. Check "Enable MAC address" check box, select "Deny the following IP
address", input MAC address in the MAC address list box and click "Add"
button. Then this MAC address will display in the list box; the operation step
of "Allow the following MAC address" is the same as that of "Deny the
following IP address".
5. Select the MAC address you want to delete from the MAC address list box and click
"Delete" button to delete that MAC address.
6. Click "Save" button to save the above setting.
3.5.3 Configure Backup & Restore
Go to Advanced configuration#Configure Backup & Restore Interface.
Import & Export Configuration:
$
1. Click "Browse" to select save path for import or export information on PC.
2. You can import or export all setting information, but those two settings "User
User name to operate the logon client end
Type of users, normal user, advanced user and super
administrator
MAC
The MAC addresses of user access the server which should
be set up according to actual MAC address of server.
Password to log in the client terminal
Password to log in the client terminal
23
Advertisement
Table of Contents
